42
Memory locations 1, 2, and 3 are used for
this example, but any memory locations
can be used for multiple loop playback.
If either the UP or DOWN footswitch
on the FS3X is pressed less than two
seconds before the end of a playing
loop, the JamMan
®
Solo will not have
enough time to cue up the next loop and
the current loop will continue to play
one more time. If any overdubs were
recorded during this type of performance,
they will be lost when the next loop is
selected and begins playing back. You
can also use the Loop Select buttons to
change loops during playback.
JamManager
TM
Librarian
Software
Loop Librarian Management software
is available as a free download from the
DigiTech website. This application runs
on both Windows XP/Vista/7 and Mac OS
X computer systems, and lets you archive
and transfer loops between the JamMan
Solo and your computer. For more
information, visit www.digitech.com.
To Next Page
Loading...
Need help?
General
