DigiTech JamMan Solo User Manual

39
If a memory card is inserted into the
JamMan
®
Solo that does not have a
valid format, the JamMan Solo will not
recognize it and the DISPLAY will read
nF. The card must be formatted before
the JamMan Solo can use it. To format the
card, follow these steps:
While the 1. DISPLAY reads nF, the
STORE button will begin flashing
prompting for a format confirmation.
Press the flashing 2. STORE button.
The DISPLAY will read F? and the
STORE button will continue to flash.
You can press the PEDAL SWITCH
to abort the procedure.
To initiate the card formatting 3.
procedure, press and hold the
STORE button for two seconds. The
DISPLAY will show Bu indicating
the card is being formatted. Once
completed, the JamMan Solo will
return to normal operation.
Unformattted Cards

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English