DigiTech JamMan Solo User Manual

26
The Pedal Tempo feature lets you set the
tempo of an empty memory location
hands-free using the PEDAL SWITCH
before you record. To use the Pedal
Tempo feature, follow these steps:
Press the 1. TEMPO and STORE
buttons simultaneously to enter the
Setup menu.
Press the 2. TEMPO (NEXT) button
until the PDL TEMPO LED is
flashing.
Press the “up” 3. LOOP SELECT
button to turn this option on.
Press the 4. TEMPO (NEXT) button
to exit the Setup menu. The Pedal
Tempo feature is now turned on for all
empty memory locations.
Select a new memory location (the 5.
LOOP and SINGLE LEDS will be off).
Press the 6. PEDAL SWITCH two
or more times to set the tempo you
want to record at. The TEMPO
button will flash at the rate you press
the PEDAL SWITCH.
Once the desired tempo is set, you 7.
must press and hold the PEDAL
SWITCH for 2 seconds until the
TEMPO button and PDL TEMPO
LEDs quickly flash confirming the
tempo is now set. The TEMPO
button will then resume flashing at
the set tempo.
You can now use the PEDAL SWITCH
to start loop recording as normal. Once a
tempo has been set, there will be a single
measure count-in indicated by the Tempo
button and Status LED before recording
begins.
Pedal Tempo Mode

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English