DITEC LCA70 User Manual

2
IP2368EN
EN
Contents
Subject Page
1. General safety precautions 3
1.1 Safety functions 4
2. EC Declaration of Conformity 4
3. Technical specifications 4
3.1 Applications 5
4. Installation and electrical connections 5
4.1 Maintenance 7
4.2 Standard installation 7
4.3 Standard installation wiring diagram 8
5. Commands and safety devices 8
5.1 Command inputs 9
5.2 Safety inputs 9
6. Outputs and accessories 9
7. Jumper setting 10
8. Application examples 11
8.1 Automations with two swinging gates 11
8.2 Automations with one swinging gate 11
9. Using menus 12
9.1 Switching the display on and off 12
9.2 Navigation keys 12
9.3 Menu map 13
10. Setting up product for first use 15
10.1 WZ configuration wizard menu
15
10.2 Basic example of start-up 17
10.3 Frequently used menu sequences 17
10.3.1 Enabling configurations 17
10.3.2 Adding remote controls 18
10.3.3 Configuring the NC contact safety devices 18
11. Configuration and settings menu 18
11.1 Main menu 18
11.2 Second level menu - AT (Automatic Configurations) 19
11.3 Second level menu - BC (Basic Configurations) 20
11.3.1 Additional BC level parameters that can be configured (available with AT → AA enabled) 21
11.4 Second level menu - BA (Basic Adjustment) 22
11.4.1 Additional BA level parameters that can be configured (available with AT → AA enabled) 23
11.5 Second level menu - RO (Radio Operations) 25
11.5.1 Additional RO level parameters that can be configured (available with AT → AA enabled) 26
11.6 Second level menu - SF (Special Functions) 27
11.6.1 Additional SF level parameters that can be configured (available with AT → AA enabled) 28
11.7 Second level menu - CC (Cycle Counter) 29
11.7.1 Additional CC level parameters that can be configured (available with AT → AA enabled) 29
11.8 Level two AP menu (Advanced parameters) 30
11.8.1
Additional configurable AP level parameters available with AT → AA enabled 31
12. Diagnostics 33
12.1 Data Logging integrated in the board 33
12.1.1 Alarm counters 33
12.1.2 Alarm log 33
13. Signals visualised on the display 34
13.1 Display of automation status 35
13.2 Display of safety devices and commands 35
13.3 Display of alarms and faults 36
14. Troubleshooting 38
Key
This symbol indicates useful information for the correct operation of the product.
Factory settings
This symbol indicates instructions or notes regarding safety, to which special attention must be paid.

DITEC LCA70 Specifications

General

Brand	DITEC
Model	LCA70
Category	Control Panel
Language	English