OPERATION
L025317 Issue 5 July 2014 3-13
D-SERIES CONNECTIVITY
The D-Series is operated either via a remote TouchPanel or via a PC running
on Microsoft Windows 7® or Windows 8® with installed Quickstep
software.
To connect to one D-Series, the TouchPanel is connected to the X59
TouchPanel connector of the controller.
The TouchPanel then displays the UI relating to that printer.
One TouchPanel can control multiple D-Series in the same network if
required.
Details about the printer being controlled are displayed in the Home screen,
which lists: the logged in user, the printer name and model. To connect to
another printer in the network, follow the steps below:
• Disconnect from the current printer by pressing the Lock button and
selecting Disconnect From Printer to display the printers’ list screen.
• Press the Lock button and select Unlock UI Settings, enter the
password (QS).
• Press Settings, select Broadcast (default) as the connection method.
• Go back to the printers’ list screen and press Refresh to view a list of
all printers in the network.
• Select the required printer.
To Next Page
Loading...
Need help?
General
