INSTALLATION INSTRUCTIONS
L025317 Issue 5 July 2014 2-59
Making marks longer than one field size
By using extended fields it is possible to mark an object that exceeds one
field size.
The procedure is the same as described previously on extending the
marking field. Move the marking object out of the real field against the
product movement direction and into an extended field.
RapidScan Technology
To achieve higher marking speeds it is possible to rotate the marking field in
45° angle steps against the product movement direction. This has to be
setup in the inital setup wizard by an administrator or by a service
technician. The scanner is installed in a 45° angle in relation to the product
movement direction.
When the RapidScan option is not used the scanner and marking field have
90° angle steps to the product movement direction.
Screen shows a long message outside the
marking field and in the extended field.