OPERATION
3-22 L025317 Issue 5 July 2014
Global Print Settings
Print Field Offset
Home > Settings > Global Print Settings > Print Field Offset
Offset for the print field in x and y direction in mm.
Note: The message must fit in the usable field, otherwise
“Transformation failed” error will occur.
Message Options
Home > Settings > Global Print Settings > Message Options
• Override global parameter sets with locals: Use parameter sets which
are defined within a message (local) or system wide (global) parameter
sets. To ensure that the correct parameter set is used if there are local
and global parameter sets with the same name.
• Load last message on startup: Automatically loads the last live
message on startup and enables printing.
Marking Engine
Home > Settings > Global Print Settings > Marking Engine
Sets the Buffer Size (default value is 20).
At high printing speeds, with for example dynamic text objects such as
counters or dates/times, the time and computer performance may be
insufficient to recompile the new content to be printed. When using the
DSP-side Buffering, a buffer is filled whenever it is possible.
To Next Page
Loading...
Need help?
General
