OPERATION
3-52 L025317 Issue 5 July 2014
Defaults
Home > Settings > Backup & Restore > Defaults
Restores the default factory settings. Messages will not be deleted.
PRINTER STATUS
Home > Printer Status
Shows statistics about the current live (printing) message and printer data.
Data displayed includes:
• Message name and messages tore used
•Print speed
•Print duration
• Products coded
• Maximum print and external update duration
• Maximum compile time
• Numbers of vectors and polygons in the current live message
• Controller and laser runtime
• Print count
ADVANCED SETTINGS
Home > Settings > Advanced
CAUTION: Setup for trained users and service technicians only.
The system may be damaged by incorrect settings.
All warranty is lost when the system is damaged by
incorrect settings.
Laser Parameters
Home > Settings > Advanced > Laser Parameters
Setup of laser parameter limits.
Set the following special laser parameters:
•Period Time
•Standby Period
•Standby Pulse
Activate the laser test mode and set the parameters:
•Period Time
•On Pulse Time
Set the period time for the laser cold start.
To Next Page
Loading...
Need help?
General
