Eaton 9155 UPS User Manual

Eaton 9155 UPS (8–15 kVA) User’s Guide 164201553—Rev H0 45
Figure 31. Stabilizing Bracket with Three Cabinets
M4 Screws
44..55 IInntteerrnnaall BBaatttteerryy TTrraayy WWiirriinngg CCoonnnneeccttiioonnss
NOTE To reduce electrical safety risks during transportation, the UPS is shipped with the
internal battery tray assemblies disconnected.
DANGER
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED SERVICE
PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.
WARNING
The UPS is intended to be operated only with batteries installed. When batteries are not installed a stabilizing
bracket is required to prevent a tip hazard.
WARNING
Only qualified service personnel (such as a licensed electrician) should perform the UPS installation. Initial
startup must be performed by an authorized Eaton Customer Service Engineer. Risk of electrical shock.
UPS System Installation

Eaton 9155 UPS Specifications

General

Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	0-95% non-condensing
Dimensions	Varies by model
Weight	Varies by model
Communication Ports	USB
Safety Approvals	UL, cUL, CE
Output Voltage	208/220/230/240 VAC
Battery Type	Valve-regulated lead acid (VRLA)
Storage Temperature	-15°C to 45°C (5°F to 113°F)