i-on40 & i-onEX Range 4. Administration
Page 37
Editing Text
For many of the items that you can program, the control unit lets you assign
a 12 character name. To key in text for the name press each number key
one or more times to obtain the letter you want (the letters of the alphabet
appear on the keys in the same arrangement as on many mobile phones,
see Figure 9.)
Press # to change between capitals and lower case letters.
The cursor becomes an underline when you type in small letters and a
block when you type in capitals.
Press to move the cursor left, or to move the cursor to the right.
Press to remove letters to the left of the cursor. Press to insert a
space.
Figure
Letters Assigned to Keys
Omitting Zones
You may wish to prevent a zone causing an alarm. For example, if your
garage door is protected by a detector, but you wish to leave it unlocked for
the delivery of a parcel, you may wish to omit that detector when you set
the rest of the alarm system. Provided that the Installer has programmed
your system to allow this, then, to "Omit" a zone:
1. Make sure the display shows the
standby screen.
ABC DEF
GHI
JKL MNO
P Q R S TUV W X Y Z
(Caps/
lower case)
Space 0
To Next Page
Loading...
Need help?
General
