Eaton i-on User Manual

i-on40 & i-onEX Range 4. Administration
Page 67
a). Press all the other buttons on the
device.
Each time you press a button on
the remote the keypad gives a
double “beep” confirmation tone.
For each button you press you will
see a similar message, for
example:


Note: If you wish to test the Hold Up
Alarm buttons on a FOB-2W-4B
make sure you press them both
at the same time.
b) Press a button on any other device
that you wish to test.
The keypad gives a double “beep”
confirmation tone.
The display shows information for
any device allocated to a user of
the system, for example:


9. Press  to end the test.


Radio Hold Up Alarms
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .
The display shows:


6. Press  until you see:



Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English