Eaton i-on User Manual

4. Administration i-on40 & i-onEX Range
Page 64
11. Press if you want to see a list of
the zones that have not yet been
tested:


12. Press  or  to scroll up or down
the list.


13. Press  to end the test.
The control unit leaves walk test
mode and the bottom line of the
display shows the option you were
using.


Outputs
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .
The display shows:


6. Press  until you see:


7. Press .
The bottom line of the display
shows the first in a list of the
outputs allocated for your use.
If the output has a name
programmed for it, that will appear
on the bottom line instead of the
output number.


Note: The display on the i-on40 will look
simpler, for example:
However, the sequence of key



Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English