3-10
OnChip VIA SATA (Enabled)
This option allows you to enable or disable the onboard Serial ATA device.
SATA Mode (IDE)
Use this item to select the mode of Serial ATA
IDE DMA transfer access (Enabled)
This item allows you to enable the transfer access of the IDE DMA then burst onto
the PCI bus and nonburstable transactions do not.
On-Chip IDE Channel 0/1 (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the
motherboard.
OnChip VIA SATA [Enabled]
SATA Mode [IDE]
IDE DMA transfer access [Enabled]
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
IDE Prefetch Mode [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Secondary Master PIO [Auto]
Secondary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
Secondary Master UDMA [Auto]
Secondary Slave UDMA [Auto]
IDE HDD Block Mode [Enabled]
Item Help
ff
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
mnlk
F5:Previous Values F6:Performance Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
These options display items that define the operation of peripheral
components on the system’s input/output ports.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in one of the PCI
slots or is integrated on the motherboard
3.3-4 Integrated Peripherals
VIA OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
X
VIA OnChip IDE Device [Press Enter]
VIA OnChip PCI Device [Press Enter]
SuperIO Device [Press Enter]
Onboard Giga LAN Device [Enabled]
Onboard Giga LAN Boot ROM [Disabled]
Onboard 1394 Device [Enabled]
Item Help
ff
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals
f
f
f
mnlk
F5:Previous Values F6:Performance Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
To Next Page
Loading...
Need help?
General
