5-6
.
5.1-9 Duplicate Critical RAID 1 Array
When booting up the system, BIOS will detect if the RAID 1 array has any
inconsistencies between user data and backup data. If BIOS detects any
inconsistencies, the status of the disk array will be marked as critical, and
BIOS will prompt the user to duplicate the RAID 1 in order to ensure the
backup data consistency with the user data.
If user selects Continue to boot, it will enable duplicating the array after
booting into OS.
5.1-8 Serial Number View
1 In the VIA RAID BIOS utility main menu, select Serial Number View
then press the <Enter> key. The focus is directed to the list of
channel used for IDE RAID arrays. Move the selection bar on each
item and the serial number is displayed at the bottom of the screen.
This option is useful for identifying same model disks.
To Next Page
Loading...
Need help?
General
