ECS KV2 Extreme User Manual

3-18
Auto Detect PCI/DIMM Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and PCI
slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Async AGP clock control (Disabled)
This item allows you to set the AGP clock in asynchronous status.
Hammer Fid control (StartUp)
This item allows you to adjust CPU frequency ID.
Hammer Vid control (StartUp)
This item allows you to adjust CPU voltage ID.
CPU Clock(200MHz)
This item allows you to adjust the CPU clock to 200Mhz to 511MHz. You can key-in the
numbers within the range to make a precise and ideal adjustment.
Turbo Performance (Disabled)
This function only works when loading performance Defaults setting.
3.3-8 Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor
you have installed in your system.
DIMM Voltage Adjust [2.60V]
AGP Voltage Regulator [1.53V]
Auto Detect PCI Clk [Enabled]
Spread Spectrum [Enabled]
Async AGP clock control [Disabled]
Hammer Fid control [StartUp]
Hammer Vid control [StartUp]
CPU Clock [200MHz]
Turbo Performance [Disabled]
Item Help

Menu Level

F5:Previous Values F6:Performance Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
DIMM Voltage Adjust (2.60V)
This item adjusts the voltage delivered to the DIMM memory.
AGP Voltage Regulator (1.53V)
This item regulates the voltage delivered to the AGP.

ECS KV2 Extreme Specifications

General

Brand	ECS
Model	KV2 Extreme
Category	Motherboard
Language	English