3-20
Supervisor Password has higher priority than User Password. You can use
Supervisor Password when booting the system or entering BIOS Setup to
modify all settings. Also you can use User Password when booting the
system or entering BIOS Setup but can not modify any setting if
Supervisor Password is enabled.
3.3-12 Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have
made in the Setup Utility and exit the Setup Utility. When the Save and
Exit dialog box appears, press <Y> to save and exit, or press <N> to
return to the main menu.
3.3-13 Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have
made in the Setup Utility and exit the Setup Utility. When the Exit Without
Saving dialog box appears, press <Y> to discard changes and exit, or press
<N> to return to the main menu.
Note: If you have made settings that you do not want to save, use the “Exit Without Saving”
item and press <Y> to discard any changes you have made.
To Next Page
Loading...
Need help?
General
