5-3
2 Select RAID 0 for performance from the menu and press <En-
ter>. From this point, you may choose to auto-configure the RAID
array by selecting Auto Setup for Performance or manually config-
ure the RAID array for stripped sets. If you want to manually
configure the RAID array continue with next step, otherwise, pro-
ceed to step #5.
3 Select Select Disk Drives, then press <Enter>. Use arrow keys to
select disk drives, then press <Enter> to mark selected drive. An
asterisk is placed before the selected drive.
4 Select Block Size, then press <Enter> to set array block size. Lists
of valid array block sizes are displayed on a pop-up menu.
Tip For server system, it is recommended to use a lower
array block size. For multimedia computer system
used mainly for audio and video editing, a higher array
block size is recommended for optimum performance.
F1 View Array
āā
Move to the next item
Enter Confirm the selection
ESC Exit
5.1-3 Create Array
1 In the VIA RAID BIOS utility main menu, select Create Array
then press the <Enter> key. The main menu items on the upper-
left corner of the screen are replaced with create array menu op-
tions.
5.1-4 RAID 0 for performance
1 Select the second option item Array Mode, then press the <Enter>
key. The RAID system setting pop-up menu appears.
To Next Page
Loading...
Need help?
General
