6.12.2 View data log (LOGVIEW)
The Log View menu allows on-screen browsing of the data log points stored in the meter.
Data points may be navigated by viewing the log number, date and time, total, or grand
total amounts. A known log may be jumped to immediately, avoiding a lengthy search for
data. All logs may be deleted with the ERASE command, requiring confirmation.
View data log (LOGVIEW)Figure 6-20:
Once the log records are displayed, use the Up and Right arrows to change the log entry
being viewed. The Enter key changes the displayed information for the same log.
Changing log entriesFigure 6-21:
6.12.3 Backlight (BAKLITE)
The Backlight menu is used to enable or disable the backlight. This feature is particularly
important for the battery-powered models with momentary backlight. This feature is not
available for models with a loop output powered backlight.
6.12.4
Analog output calibration (AO CAL)
This feature is only used at the factory for diagnostic purposes. It is not recommended to
access this menu without instruction from technical support.
Product advanced features
User manual 81
To Next Page
Loading...
Need help?
General
