Paper Out
Explanation:
There is no paper in the specified paper source.
Load paper of the size into the paper source.
Paper Jam
Explanation:
A paper jam occurs.
Clear the paper jam. See “Clearing Jammed Paper” on page 79 for instructions.
Reset All
Explanation:
All printer settings have been reset to the default configuration, or to the last settings that were saved.
Service Required (engine error)
Explanation:
A print engine error has been detected.
Turn off the printer. Wait at least 5 seconds, then turn it back on. If the lights come on again, turn off the
printer, unplug the power cord, and contact a qualified service representative.
Cancel All Print Jobs
Explanation:
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently
receiving or printing.
Wait until the cancellation is finished.
Service Required (controller error)
Explanation:
A controller error has been detected.
Turn off the printer. Wait at least 5 seconds, then turn it back on. If all the lights come on again, turn off
the printer, unplug the power cord, and contact a qualified service representative.
Canceling Printing
Press the + Cancel Job button on the printer‘s control panel.
To cancel a print job before it is sent from your computer, see “Cancelling a Print Job” on page 37.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide
Troubleshooting 112
To Next Page
Loading...
Need help?
General