❏ Carbon paper, carbonless paper, thermal-sensitive paper, pressure-sensitive paper, acid paper, or
paper that uses high-temperature-sensitive ink (around 225 ˚C)
❏ Labels that peel easily or labels that do not cover the backing sheet completely
❏ Coated paper or special surface-colored paper
❏ Paper that has binder holes or is perforated
❏ Paper that has glue, staples, paper clips, or tape on it
❏ Paper that attracts static electricity
❏ Moist or damp paper
❏ Paper of uneven thickness
❏ Overly thick or thin paper
❏ Paper that is too smooth or too rough
❏ Paper that is different on the front and back
❏ Paper that is folded, curled, wavy, or torn
❏ Paper of irregular shape, or paper that does not have right angle corners
Printable area
4-mm minimum margin on all sides. (The printable width should be 202 mm or less.)
Note:
❏ The printable area varies, depending on the emulation mode in use.
❏ When using ESC/Page language, there is 5-mm minimum margin on all sides.
❏ The print quality may be irregular depending on the paper you use. Print on one or two sheets of
paper to check the print quality.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide
Technical Specifications 152
To Next Page
Loading...
Need help?
General