Control panel
a.
Information button
Prints status sheets when the Error light is off and no warning is
indicated. Prints a status sheet when pressed once. If your printer
is a DN model, pressing this button for more than two seconds
prints a network status sheet. Clears the warning when a warning
is indicated.
b.
Job Cancel button
Press once to cancel the current print job. Press and hold for more
than two seconds to delete all jobs from the printer memory.
c.
Data light (Green)
On when print data is stored in the print buffer (the section of
printer memory reserved for receiving data) but not yet printed.
Flashes when the printer is processing data. Off when no data
remains in the print buffer.
d.
Ready light (Green)
On when the printer is ready, indicating that the printer is ready to
receive and print data. Off when the printer is not ready. This light
also comes on in combination with other lights to indicate error
situations.
e.
Start/Stop button
Switches the printer between ready and offline status.
f.
Error light (Orange)
On or flashes when an error has occurred.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide
Getting to Know Your Printer 23
To Next Page
Loading...
Need help?
General