Epson AcuLaser M2300D series User Manual

Using EPSON Status Monitor
EPSON Status Monitor is a utility program that monitors your printer and gives you information
about its current status.
Accessing EPSON Status Monitor
For Mac OS X 10.5 or later users
1. Open System Preferences, and then double-click the Print & Fax icon.
2. Select your printer from the Printers list and click Open Print Queue.
3. Click the Utility icon.
For Mac OS X 10.6, click the Utility tab, and click Open Printer Utility button.
For Mac OS X 10.4 users
Note:
After installing the EPSON Status Monitor and before doing the procedure below, you need to open the
Print dialog box so the EPSON Status Monitor can display the current status of the printer.
1. Open the Applications folder on your hard disk drive, then open the Utilities folder.
2. Double-click the Printer Setup Utility icon.
3. Double-click your printer from the Name list.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide
About the Printer Software 137

Epson AcuLaser M2300D series Specifications

General

Brand	Epson
Model	AcuLaser M2300D series
Category	Printer
Language	English