Introduction
12
Rear
Name Function
a
Power inlet
Connect the power cord. s p.22
b
Speaker
The projector's built-in speaker. Outputs audio.
c
Remote receiver
Receives signals from the remote control. s p.21
d
RS-232C port
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
s p.76
e
Audio (L-R) port
Inputs audio from equipment connected to the Video port or the PC port.
s p.17
f
USB port
Connects USB devices such as a USB memory device or a digital camera, and
projects images as a slideshow.
s p.18
Also, connects an optional Wireless LAN Unit.
s p.19
g
Service port
Service port. This is not normally used.
h
Audio Out port
Outputs audio during playback to the external speakers.
i
Video port
Connects to the composite video output port on video equipment. s p.17
j
PC port
Connects to the RGB output port on a computer. s p.17
k
HDMI2 port
Connects HDMI compatible video equipment and computers. s p.17
l
HDMI1 port
Connects HDMI compatible video equipment and computers. s p.17
Also, connects MHL compatible smartphones and tablets.
s p.18