Name: Epson EH-TW5200
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Preparing

Preparing the Remote Control

Installing the Remote Control Batteries

Attention

•

Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the

correct way.

•

You cannot use other batteries except for the AA size manganese or alkaline.

Remove the battery cover.

While pushing the battery compartment

cover catch, lift the cover up.

Replace the old batteries with new

batteries.

Check the polarity of the batteries (+) and

(-) before installing.

Reattach the battery cover.

Press the cover until it clicks into place.

If delays in the responsiveness of the

remote control occur or if it does not

operate, it probably means that the

batteries are becoming flat. When this

happens, replace them with new

batteries. Have two AA size manganese

or alkaline batteries ready.

Other manuals for Epson EH-TW5200

Questions and Answers:

Need help?

Do you have a question about the Epson EH-TW5200 and is the answer not in the manual?

Projection Specifications

native resolution	1080p (1920 x 1080)
f-number	1.58 - 1.72
focal length	16.9 - 20.28 mm
zoom ratio	1 - 1.2
throw ratio	1.22 - 1.47 (Wide - Tele)
lamp type	200W UHE
lamp life (normal / eco)	5, 000 hours / 6, 000 hours
screen size (projected distance) - zoom : wide	34” - 328” [0.9 - 9.0 m]
screen size (projected distance) - zoom : tele	34” - 328” [1.08 - 10.8 m]