Epson EH-TW5200 User Manual

Useful Functions
35
Enjoying 3D Images
Setting 3D Images
Set the source to HDMI1 or HDMI2 to view 3D images.
The projector supports following 3D formats.
•
Frame Packing
•
Side by Side
•
Top and Bottom
When the projector detects a 3D format
The projector automatically projects a 3D image when detecting a 3D format.
When the projector cannot detect a 3D format
Some 3D TV broadcasts may not contain 3D format signals. If this
happens, set the 3D format manually. Press the
button to
set the 3D format on the AV device.
c
•
For details on 3D format settings on the AV device, see the documentation supplied with the AV device.
•
When the 3D format has not been correctly set up, an image will not be correctly projected as shown
below.
If the 3D image cannot be viewed
Check the following if the 3D effect is not displayed correctly, even after setting the 3D formats.
•
The synchronization timing for the 3D Glasses may have been inversed. Inverse the synchronization using Inverse
3D Glasses, and then try again.
s Signal - 3D Setup - Inverse 3D Glasses p.47
•
The image is not displayed in 3D if 3D Display is set to Off. Press the button on the remote control. s Signal -
3D Setup - 3D Display p.47
c
•
How a 3D image is perceived varies depending on the individual.
•
When a 3D image is displayed, a warning about viewing 3D images is displayed. You can turn off this
warning by setting 3D Viewing Notice to Off.
s Signal - 3D Setup - 3D Viewing Notice p.47
•
During 3D projection, the following Configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Overscan (set to Off)
•
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.

Epson EH-TW5200 Specifications

Projection Specifications

native resolution	1080p (1920 x 1080)
f-number	1.58 - 1.72
focal length	16.9 - 20.28 mm
zoom ratio	1 - 1.2
throw ratio	1.22 - 1.47 (Wide - Tele)
lamp type	200W UHE
lamp life (normal / eco)	5, 000 hours / 6, 000 hours
screen size (projected distance) - zoom : wide	34” - 328” [0.9 - 9.0 m]
screen size (projected distance) - zoom : tele	34” - 328” [1.08 - 10.8 m]

Brightness and Contrast

colour light output (normal)	2, 000 lm
white light output (normal)	2, 000 lm
contrast ratio (auto iris: on)	15, 000:1

Audio and Speaker

sound output	2W Monaural

Power

power supply voltage	100 - 240 V AC ±10%, 50/60 Hz
power consumption (lamp on - normal / eco)	287W / 217W
standby power consumption	0.31W

Operating Conditions

operating temperature	5 - 35 °C
operating altitude	0 - 3, 000 m
fan noise (normal / eco)	37dB / 29dB

Weight and Dimensions

weight	2.8 kg
dimension excluding feet	247 x 297 x 105 mm