Epson EH-TW5200 User Manual

Configuration Menu
47
Function Menu/Settings Explanation
Auto Iris
Off, Normal, High Speed You can change the luminance adjust‐
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu‐
minance adjustment.
s p.34
Reset
Yes, No You can reset all adjustment values for
Image to their default settings.
*
This is not displayed when a computer image signal is being input.
Signal menu
No sub menu items are displayed for the signal menu for USB signal input.
Function Menu/Settings Explanation
3D Setup
*1
3D Display On, Off Enables or disables the 3D Display function.
s p.35
3D Format Auto, Side by Side,
Top and Bottom, 2D
Sets the 3D format for the input signal. If set to
Auto, the format is recognized automatically.
3D Depth -10 - 10 Sets the depth for the 3D image.
Diagonal Screen
Size
60 - 300 Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
3D Brightness Low, Medium, High Sets the brightness for the 3D image.
Inverse 3D Glasses Yes, No Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
3D Viewing Notice On, Off Turns the notice that appears when viewing 3D
content on or off.
Aspect
*2
Auto, Normal, Full, Zoom Selects the aspect mode. s p.30
Tracking
*2 *3
Varies depending on the input signal. Adjusts computer images when vertical stripes
appear in the images.
Sync.
*2 *3
0 - 31 Adjusts computer images when flickering, fuzzi‐
ness, or interference appear in the images.
•
Adjusting the Brightness, Contrast, or Sharp‐
ness may cause flickering or blurriness.
•
Adjusting the synchronization after adjusting
tracking allows for more accurate adjustments.
Position
*2 *4
Adjusts the display position up, down, left, and
right when a part of the image is missing so that
the whole image is projected.
Auto Setup
*3
On, Off Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the tracking, display position,
and synchronization are automatically config‐
ured.

Epson EH-TW5200 Specifications

Projection Specifications

native resolution	1080p (1920 x 1080)
f-number	1.58 - 1.72
focal length	16.9 - 20.28 mm
zoom ratio	1 - 1.2
throw ratio	1.22 - 1.47 (Wide - Tele)
lamp type	200W UHE
lamp life (normal / eco)	5, 000 hours / 6, 000 hours
screen size (projected distance) - zoom : wide	34” - 328” [0.9 - 9.0 m]
screen size (projected distance) - zoom : tele	34” - 328” [1.08 - 10.8 m]

Brightness and Contrast

colour light output (normal)	2, 000 lm
white light output (normal)	2, 000 lm
contrast ratio (auto iris: on)	15, 000:1

Audio and Speaker

sound output	2W Monaural

Power

power supply voltage	100 - 240 V AC ±10%, 50/60 Hz
power consumption (lamp on - normal / eco)	287W / 217W
standby power consumption	0.31W

Operating Conditions

operating temperature	5 - 35 °C
operating altitude	0 - 3, 000 m
fan noise (normal / eco)	37dB / 29dB

Weight and Dimensions

weight	2.8 kg
dimension excluding feet	247 x 297 x 105 mm