Before Using Fax Features
Faxing feature is available only for ET-4810 Series/L5590 Series.
Check the following before you start using the fax features.
❏ e printer and the phone line, and (if it is being used) the phone machine are connected correctly
❏ Fax basic settings (Fax Setting Wizard) is complete
❏ Other necessary Fax Settings are complete
See "Related Information" below to make settings.
Related Information
& “Connecting the Printer to a Phone Line” on page 73
& “Making the Printer Ready to Send and Receive Faxes” on page 76
& “Making Settings for the Printer's Fax Features According to Use” on page 78
& “Fax Settings” on page 217
& “Making Contacts Available” on page 81
& “User Default Settings Menu” on page 222
Connecting the Printer to a Phone Line
Compatible Telephone Lines
You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and
PBX (Private Branch Exchange) telephone systems.
You may not be able to use the printer with the following phone lines or systems.
❏ VoIP phone line such as DSL or ber-optic digital service
❏ Digital phone line (ISDN)
❏ Some PBX telephone systems
❏ When adapters such as terminal adapters, VoIP adapters, splitters, or DSL router are connected between the
telephone wall jack and the printer
Related Information
& “Connecting the Printer to a Phone Line” on page 73
Connecting the Printer to a Phone Line
Connect the printer to a telephone wall jack using an RJ-11 (6P2C) phone cable. When connecting a telephone to
the printer, use a second RJ-11 (6P2C) phone cable.
Depending on the area, a phone cable may be included with the printer. If it is included, use that cable.
You may need to connect the phone cable to an adapter provided for your country or region.
Faxing
>
Before Using Fax Features
>
Connecting the Printer to a Phone Line
73
To Next Page
Loading...
Need help?
General
