To Next Page

To Previous Page

Related Information

& “Connecting the Printer to a Phone Line” on page 73

& “Making Settings to Use an Answering Machine” on page 79

& “Receive Mode:” on page 219

& “Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)” on page 79

& “Basic Settings Menu” on page 217

Making Settings for the Printer's Fax Features According to Use

You can congure the printer's fax features individually using the printer's control panel according to use. e

settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax

Settings menu.

“Fax Settings” on page 217

Related Information

& “Receiving Incoming Faxes” on page 90

& “Making Settings for a PBX Phone System” on page 78

& “Making Settings When You Connect a Phone Device” on page 79

& “Making Settings for Blocking Junk Faxes” on page 80

& “Making Settings to Send and Receive Faxes on a Computer” on page 80

Making Settings for a PBX Phone System

Make the following settings when using the printer in oces that use extensions and require external access codes,

such as 0 and 9, to get an outside line.

1. Select Settings on the printer's control panel.

To select an item, use the

buttons, and then press the OK button.

2. Select Fax Settings > Basic Settings.

Select Line Type, and then select PBX.

4. When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select

Use as the Access Code.

e # entered instead of the actual access code, is replaced with the stored access code when dialing. Using #

helps avoid connection problems when connecting to an outside line.

Note:

You cannot send faxes to recipients in Contacts in which an external access code such as 0 or 9 is set.

If you have registered recipients in Contacts using an external access code such as 0 or 9, set the Access Code to Do Not

Use. Otherwise, you must change the code to # in Contacts.

5. Enter the external access code used for your phone system, and then press the OK button.

6. Press the OK button to apply the settings.

e access code is stored in the printer.

Faxing

Before Using Fax Features

Making Settings for the Printer's Fax Features According to Use

Epson L3560 Series User Manual

Questions and Answers: