Epson M1170 Series User Manual

Related Information
& “Making Wi-Fi Settings by Push Button Setup” on page 20
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 21
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 22
Making Wi-Fi Settings by Push Button Setup
You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏ e wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏
e
current Wi-Fi connection was established by pressing a button on the wireless router.
When the printer is connected by Ethernet, disconnect the Ethernet cable, and then start making Wi-Fi settings.
1. Hold down the [WPS] button on the wireless router until the security light ashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
2. Hold down the
button on the printer for at least ve seconds until the light and the light ash
alternately.
e connection setting will start. When a connection is established, the
light turns on.
User's Guide
Network Settings
20

Epson M1170 Series Specifications

General

Brand	Epson
Model	M1170 Series
Category	Printer
Language	English