Fine-Tuning the Projector 135
Enabling Quick Setup Options
Your projector can quickly detect and set up the focus, straighten the
image, and adjust the colors for the surface the image is being
projected on. Follow these steps to enable these features:
1. Press the
Menu button on the remote control.
You see the projector’s menu screen.
2. Select the Setting menu and press Enter. Then highlight Quick
Setup
and press Enter.
3. Select
Quick Setup Options and press Enter.
4. Adjust any of these options:
■ Highlight Auto Focus to automatically focus the projector.
■ Highlight Auto Quick Corner to automatically straighten
the image if it is not rectangular.
■ Highlight Wall Shot to project on walls or surfaces that are
not white.
5. Press
Enter, then highlight ON or OFF and press enter. Highlight
Return and press Enter.
6. When you are done adjusting settings, press the
Menu button to
exit.
To Next Page
Loading...
Need help?
General