20 Displaying and Adjusting the Image
Selecting the Image Source
Selecting the image source lets you switch between images input from
different pieces of connected equipment (such as a computer or DVD
player).
If you don’t see the image you want, press the
Source Search button
on the remote control or the projector.
You can also select your image using the
Source buttons either on the
projector or the remote control as follows:
■ The projector has two Source buttons. Use the
Computer/Component button to switch between EasyMP, and
between equipment connected to the
Computer/Component
ports.
Use the
Video/S-Video button to switch between equipment
connected to the
Video and S-Video ports.
■ The remote control has five Source buttons. Use them to switch
between devices connected to the ports identified on each button,
or select EasyMP
TM
to project wirelessly or from a memory card.
You can also press the
Source Search button on the projector or the
remote repeatedly until you see the image you want to project on the
screen.
note
To focus and adjust the
image, see page 24. If a
projected image fails to
appear, see page 21 for help.
note
You can also preview all
sources on one screen to help
you select the desired source
(see page 35).