60 Presenting Through a Wireless Network
Starting EasyMP
Before connecting to the projector, you have to switch it to EasyMP
mode. Follow these steps:
1. Turn on the remote control, as described on page 32. Point it at
the projector and press the P
Power button.
2. Press the
EasyMP button on the remote control to select EasyMP
as the source.
3. Insert the Epson 802.11g card in the card slot with the label
facing upward.
note
Only the Epson 802.11g
card is guaranteed to work.
Other brands may not be
compatible.
caution
Be careful to insert the card
correctly and never force the
card in; doing so may
damage it. The black end of
the card protrudes from the
slot when the card is fully
inserted.
Always remove the card
before transporting the
projector. See page 93 for
instructions.
To Next Page
Loading...
Need help?
General