Connecting to Computers, Cameras, and Other Equipment 47
Connecting to the Computer Ports
You can connect to either Computer/Component port using the
VGA computer cable that came with the projector (the monitor port
on your computer must be a mini D-sub 15-pin port).
1. If you’re using the VGA computer cable, connect one end to one
of the projector’s
Computer/Component ports, and the other
end to your computer’s monitor port. Then go to step 4.
2. You can connect an optional stereo mini-jack audio cable to play
sound through the projector (see page 57), an external monitor
(see page 50), or a USB cable to use the remote control as a mouse
(see page 49).
3. When you’ve finished making any connections, see page 18 for
instructions on turning on the projector and adjusting the image.
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.
To Next Page
Loading...
Need help?
General