Connecting to Computers, Cameras, and Other Equipment 51
Connecting to Video Equipment
You can connect up to four video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video player has a yellow RCA-style video output
connector, see “Connecting a Composite Video Source” on
page 52.
■ If your video player has an S-Video connector, see “Connecting
an S-Video Source” on page 53.
■ If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 54.
■ If your video player has an RGB video port (either a single
connector for a VGA-style monitor cable or three connectors
labeled R/G/B), see “Connecting an RGB Video Source” on
page 55.
After connecting video cables, you may also want to:
■ Connect a monitor to the projector so you can view your
presentation close-up as well as on-screen; see page 50.
■ Connect an audio cable to play sound through the projector; see
page 57.
RCA connector
(composite video)
S-Video
connector
VGA connector
(RGB video)
To Next Page
Loading...
Need help?
General