Removing Software
c
Important:
❏ Log in to an "Computer administrator"
account (an account with administrator
privileges).
❏ Enter the administrator password when
prompted and then proceed with the
remainder of the operation.
❏ Close all other running applications during
uninstallation.
Windows
This section describes how to uninstall EPSON LFP
Remote Panel 2 and the Epson communications driver
using them as an example.
A
Turn off the printer, and unplug the interface
cable.
B
Go to the Control Panel and click Uninstall a
program from the Programs category.
C
Select the software you want to remove and then
click Uninstall/Change (or Change/Remove).
Select the EPSON SC-F6200 Series Comm
Driver or EPSON SC-F6000 Series Comm
Driver printer uninstaller to remove the Epson
communications driver.
To uninstall EPSON LFP Remote Panel 2, select
EPSON LFP Remote Panel 2.
D
Select the target printer icon, and then click OK.
E
Follow the on-screen instructions to continue.
When the delete confirmation message appears,
click Yes.
If you are reinstalling the Epson communications
driver, restart the computer.
Mac OS X
The following describes how to remove the EPSON LFP
Remote Panel 2.
A
Quit EPSON LFP Remote Panel 2.
B
Drag and drop the EPSON LFP Remote Panel 2
folder from the Applications folder into the
Trash.
Use the Uninstaller to uninstall other software.
Uninstall the affected applications before performing a
reinstall or update.
Download
The Uninstaller can be downloaded from the Epson
website.
URL: http://www.epson.com
Uninstall
Follow the instructions provided on the Uninstaller
download site.
Using EPSON LFP Remote
Panel 2
EPSON LFP Remote Panel 2 is used to update firmware
from a computer and copy paper settings bank created
in the printer's setup menu to a computer.
You can download it at your local Epson Web site.
http://www.epson.com/
Launching the EPSON LFP
Remote Panel 2
Launch EPSON LFP Remote Panel 2 after confirming
that the printer displays Ready.
SC-F6200 Series/SC-F6000 Series User's Guide
Introduction
23