Menu Descriptions
Print Job menu
Setting items and setting values marked with asterisks indicate the following printer models.
*1: SC-F6000 Series only
*2: Only available for models with a Waste Ink Bottle
Item Description
Print Job Log Sheet
*1
Press the Z button to print the print job log.
Paper menu
indicates factory default settings.
Item Description
Load/Remove Paper Remove Paper Press the Z button to view instructions for
removing the paper. Follow the on-screen
instructions to remove the paper.
Instructions are not displayed if no paper is loaded.
Roll Paper After you make your selection, press the Z
button. Follow the on-screen instructions to load
the paper.
If the roll paper is already loaded, the instructions
for removing the loaded paper type will be
displayed before loading instructions are shown.
Select
Paper Type
1 to 10 (Paper Settings Number) Select the paper settings to use for printing.
Set to a number between 1 and 10 to use the paper settings set in that slot
for printing. To save a group of paper settings in this way, use Custom
Paper Setting. If RIP Settings is selected, the paper settings set in the
software RIP are used.
RIP Settings
SC-F6200 Series/SC-F6000 Series User's Guide
Using the Control Panel Menu
44
To Next Page
Loading...
Need help?
General