B
Remove the Waste Ink Bottle from the Waste Ink
Bottle holder.
Note:
If the back of the stopper is stained, wipe it.
C
Insert the waste ink tube into the mouth of the
new Waste Ink Bottle and place the Waste Ink
Bottle in the holder.
Tightly seal the lid on the used Waste Ink Bottle.
c
Important:
❏ Be sure to confirm that the waste ink tube
is inserted in the mouth of the waste ink
bottle. Ink will spill onto the surrounding
area if the tube is not inserted in the
bottle.
❏ You will need the lid for the Waste Ink
Bottle when disposing of waste ink. Keep
the lid in a safe place; do not throw it out.
D
Lower the stopper.
c
Important:
Check that the stopper is stuck close to the
mouth of the bottle. If there is a gap, waste ink
may splatter and stain the surrounding area.
E
Press the Zbutton.
F
Check again to confirm that a new waste ink
bottle is correctly placed. Next, press the Z
button to reset the waste ink counter.
U “Handling Used Consumables” on
page 72
Replacing Maintenance Boxes
If the message No Enough Space is displayed, replace
the specified Maintenance Box.
Supported Maintenance Boxes
SC-F6200 Series/SC-F6000 Series User's Guide
Maintenance
66
To Next Page
Loading...
Need help?
General