Epson SC-F9300 series User Manual

Item Parameter Explanation
Margin Setting
Side Margin(Right)
3 to 25 mm (5
*
)
Choose the width of the right margin when media is loaded in the
printer. See the following for more information.
U “Printable area” on page 52
Side Margin(Left)
3 to 25 mm (5
*
)
Choose the width of the left margin when media is loaded in the
printer. See the following for more information.
U “Printable area” on page 52
Print Start Position
0 to 800 mm (0
*
)
Adjust this parameter if you want to print from the near center of the
media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media
and Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
U “Printable area” on page 52
Margin Between Pages
Standard
*
- You can adjust a margin between pages. Even after making
adjustments, the size of the margin may change, depending on the
media and usage environment.
The margin increases when the number is moved in the + direction, and
decreases when the number is moved in the - direction.
U “Printable area” on page 52
No Margin -10 mm to +10 mm
Skip Wrinkled Media On
Off is recommended in normal circumstances.
If the print head is scuffed because of wrinkles that occur from media
being left on the heater, set this to On.
Turn this On to feed media 200 mm and print to avoid wrinkles when
printing with non-continuous jobs. In the following situations, the
media is not fed, even if this is turned On.
❏ When printing with continuous jobs.
❏ When Margin Between Pages is set to No Margin.
Off
*
Media Check
SC-F9300 Series User's Guide
Using the Control Panel Menu
100

Epson SC-F9300 series Specifications

General

Brand	Epson
Model	SC-F9300 series
Category	Printer
Language	English