C
In one-second intervals, move the stirring stick
up and down. Repeat about 15 times.
When moving the stirring stick up and down,
touch the ink inlet cap to the ink tank and raise
it until you can see the hook on the stirring
stick completely.
c
Important:
Move the stirring stick slowly. If you move it
too quickly, ink may splatter.
D
Put the ink inlet cap back on the ink tank.
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into
contact with the ink inlet cap when pulling it
out, the cap could be damaged.
E
Close the ink inlet cover.
Disposing of Waste Ink
Preparing and Replacement
Timing
When Prepare empty waste ink bottle. is displayed,
Prepare a new Waste Ink Bottle as soon as possible.
When you want to replace the Waste Ink Bottle at this
stage due to night operations and so on, select Replace
Ink Bottle from the setup menu, and then replace the
bottle. If you perform the replacement without
selecting Replace Ink Bottle, the waste ink counter
will not operate correctly.
Maintenance menu U “The Maintenance Menu” on
page 104
Waste Ink Counter U “Waste Ink Counter” on
page 74
c
Important:
Never remove the Waste Ink Bottle while printing
or while the heads are being cleaned, unless there
are on-screen instructions. Failure to observe this
precaution could cause ink to leak.
SC-F9300 Series User's Guide
Maintenance
73
To Next Page
Loading...
Need help?
General