Replace waste ink bottle and press . is displayed
Replace the Waste Ink Bottle with a new bottle
immediately.
Replacement procedure U “Replacing the Waste Ink
Bottle” on page 74
Waste Ink Counter
The printer uses the waste ink counter to track waste
ink and displays a message when the counter reaches
the warning level. Replace waste ink bottle and press
.and replace the Waste Ink Bottle with a new
one, the counter is cleared automatically.
If you need to replace the waste ink bottle before the
message is displayed, select Replace Ink Bottle from
the setup menu.
Maintenance menu U “The Maintenance Menu” on
page 104
c
Important:
If you replace the Waste Ink Bottle before being
prompted by a message, always clear the waste
ink counter. Otherwise, the replacement interval
for the Waste Ink Bottle will no longer be notified
correctly from the next message.
Replacing the Waste Ink Bottle
Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on page 59
A
Remove the Waste Ink Bottle from the Waste
Ink Bottle holder.
If the backside of the stopper is stained, wipe it.
B
Insert the waste ink tube into the mouth of the
new Waste Ink Bottle and place the Waste Ink
Bottle in the holder.
Tightly seal the lid on the used Waste Ink Bottle.
SC-F9300 Series User's Guide
Maintenance
74
To Next Page
Loading...
Need help?
General