Epson SC-F9300 series User Manual

C
Set the Auto switch to Off. Take up the cut
media completely by operating the Manual
switch according to how the media is rolled.
Removing Media
Caution:
❏ If the media weighs over 20 kg, it should not
be carried by one person. When loading or
removing the media, use at least two people.
❏ Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
Rotate the handle of the left-side roll core holder.
B
To prevent the media from sliding off the roll,
support the roll at its left end.
C
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
D
Lower the roll onto the roll support.
E
To prevent the media from sliding off the roll,
support the roll at its right end.
F
Loosen the right roll core holder fixing screw
and remove the roll core holder from the roll.
G
Lower the roll onto the roll support.
H
To remove media from the rear media feeding
unit, reverse the steps you followed to load it.
SC-F9300 Series User's Guide
Basic Operations
44

Epson SC-F9300 series Specifications

General

Brand	Epson
Model	SC-F9300 series
Category	Printer
Language	English