c
Important:
If hooked sections are not positioned
correctly, return to Step 3 to attach them
again. Otherwise, the head may be damaged.
F
While holding the tabs of each media edge
plate on both sides, move both the plates to the
left and right edges of the platen respectively.
Releasing the tab fixes the media edge plate.
G
Close the left maintenance cover and front cover.
Disposal of used
consumables
Disposal
The following used parts with adhered ink are
classified as industrial waste.
❏ Cleaning stick
❏ Clean-room wiper
❏ Ink cleaner
❏ Waste ink
❏ Waste Ink Bottle
❏ Wiper unit
❏ Flushing pad
❏ Media after printing
Dispose of items according to local laws and
regulations. For example, contract a industrial waste
disposal company for disposal. In such cases, submit
the “Safety data sheet” to the industrial waste disposal
company.
You can download it at your local Epson Web site.
Checking for clogged
nozzles
We recommend that you check the nozzles for clogs
each time you print to ensure quality results.
Ways to Check for Clogs
The following are 2 ways to check for nozzle clogs.
On-Demand Nozzle Pattern
When you want to check that there is no clogging or
stripes and unevenness in print results before
printing, print a nozzle check pattern. Inspect the
printed check pattern visually to determine whether
the nozzles are clogged.
See the following for details.
U “Printing nozzle check patterns” on page 81
Depending on the width of the loaded media, you can
save media by printing additional test patterns in the
space beside an existing pattern:
❏ If the width is equal to or greater than 51 inches
but less than 64 inches, up to three patterns can
be printed (one on the left, one in the center, and
one on the right).
❏ If the width is equal to or greater than 34 inches
but less than 51 inches, up to two patterns can be
printed (one on the left and one on the right).
❏ Patterns cannot be printed side-by-side if the
media is less than 34 inches wide or if Media Size
Check is set to Off.
SC-F9300 Series User's Guide
Maintenance
80
To Next Page
Loading...
Need help?
General