Epson SC-F9300 series User Manual

D
Insert a new media edge plate into the left edge
of the platen.
c
Important:
You cannot attach the media edge plates
from the right.
When inserting the plate, check the following
two points.
(1) Align the white line on the platen with that of
the media edge plate.
(2) While pressing the tip of the metallic plate
against the platen, attach the hooked sections
to the front corner of the platen.
E
Check that three hooked sections at the rear of
the media edge plate are securely applied as
shown below and that they are attached with no
gap between the platen and media edge plate.
Hook into the tip: Corners of the platen
Hook into the rear of square hole: Groove in
front of white line
Hook into the rear of tab: Front corner of the
platen
SC-F9300 Series User's Guide
Maintenance
79

Epson SC-F9300 series Specifications

General

Brand	Epson
Model	SC-F9300 series
Category	Printer
Language	English