Epson SC-F9300 series User Manual

J Status lamp
The color indicates the network's communication speed.
Red : 100Base-TX
Green : 1000Base-T
K USB port
Connects the USB cable.
Inside
Dirt on any of the following parts may reduce print quality. Regularly clean or exchange these parts as described in
the chapters listed in the reference sections below.
A Print head
The print head prints by moving left and right while emitting ink. Clean at least once a month.
U “Cleaning Around the Print Head” on page 62
B Media edge plates
The media edge plates prevent the media riding up and keeps fibers on the cut edge of the media from
touching the print head. Position the plates at either side of the media before printing.
U “Loading media” on page 27
C Cutter groove
Pass the blade of a cutter (available in the market) down this groove to cut media.
U “Cutting Media” on page 43
SC-F9300 Series User's Guide
Introduction
9

Epson SC-F9300 series Specifications

General

Brand	Epson
Model	SC-F9300 series
Category	Printer
Language	English