❏ Always turn the printer o using the
P
button. Do not unplug the printer or turn o the power at the outlet
until the
P
light stops ashing.
❏ If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical
outlet.
Advisories and Warnings for Using the Printer with a Wireless
Connection
❏ Radio waves from this printer may negatively
aect
the operation of medical electronic equipment, causing
them to malfunction. When using this printer inside medical facilities or near medical equipment, follow
directions from the authorized personnel representing the medical facilities, and follow all posted warnings and
directions on the medical equipment.
❏ Radio waves from this printer may negatively aect the operation of automatically controlled devices such as
automatic doors or re alarms, and could lead to accidents due to malfunction. When using this printer near
automatically controlled devices, follow all posted warnings and directions on these devices.
Advisories and Warnings for Using the Touchpad
❏ e touchpad only responds when touched directly with your nger.
❏
e
touchpad may not respond if your
ngers
are wet, if you are wearing gloves, or if there is a protective sheet
or sticker on the touchpad.
❏ Do not use sharp objects such us a ballpoint pen or mechanical pencil to perform operations. e touchpad
may be damaged.
❏ If the touchpad gets dirty, wipe it with a so cloth. If it is very dirty, dip a so cloth in a solution diluted with
neutral detergent, squeeze it well, wipe o the dirt, and then wipe it with a so dry cloth. Do not use volatile
chemicals such as thinner, benzene, or alcohol.
e
surface of the touchpad may be damaged.
❏ Avoid locations subject to rapid changes in temperature and humidity. Condensation will form inside the
touchpad, and may cause performance to deteriorate.
❏ e LCD screen may contain a few small bright or dark spots, and because of its features it may have an uneven
brightness. ese are normal and do not indicate that it is damaged in any way.
❏ Do not press the touchpad with too much force or subject it to heavy impacts.
e
touchpad could break.
Contact your dealer if the touchpad surface chips or cracks, and do not touch or attempt to remove the broken
pieces.
Advisories and Warnings for Transporting or Storing the Printer
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Before transporting the printer, make sure that the print head is in the home (far right) position.
Important Instructions
>
Printer Advisories and Warnings
>
Advisories and Warnings for Transporting or Stori
…
13