FlexRadio Systems Flex-3000 User Manual

O P E R A T I N G F O R M S C H A P T E R 5
 RX Only: If this box is checked, the radio will not transmit while in this configured band.
 Power: Sets the Drive control on the front console to this value whenever the VFO is within
the configured band.
 Use XVTR PWR for Tune: When you click the TUN button on the Front Console the power will
be set to the value you enter in the Power control on this form (see above). Otherwise, the
Tune Power setting on the Setup Form – Transmit Tab (page 92) will be used.
[The rest of this page has been left blank intentionally]
122  2003-2009 FlexRadio Systems

FlexRadio Systems Flex-3000 Specifications

General

Brand	FlexRadio Systems
Model	Flex-3000
Category	Transceiver
Language	English