FlexRadio Systems Flex-3000 User Manual

P O W E R S D R I N S T A L L A T I O N & S E T U P C H A P T E R 2
Select the desired Input and Output channels. Only one Input channel can be selected, but multiple
Output channels can be selected. For more detailed information see page 128).
Completely Factory Calibrated
The FLEX-3000 comes to you completely factory calibrated and therefore no further calibration is
usually required. If due to some unlikely event you suspect your radio needs to be recalibrated, please
contact FlexRadio Support, (on our Website, select About FlexRadio and then Contact Us) who will
guide you through the process.
You are now ready to use your FLEX-3000. Click on Start on the Front Console and you should hear
receive audio. If you do not, double check all your connections and settings (especially for the Mixer
form).
We urge you to read the remainder of this manual to help you fully understand the FLEX-3000 and
PowerSDR. This will enable you to optimize your radio for your personal operating style and
environment. You may also want to visit our extensive and ever expanding Knowledge Center
(http://kc.flex-radio.com/search.aspx) for more detailed and more up-to-date information on many
topics.
[The rest of this page has been left blank intentionally]
33  2003-2009 FlexRadio Systems
Figure 29: Audio Mixer

FlexRadio Systems Flex-3000 Specifications

General

Brand	FlexRadio Systems
Model	Flex-3000
Category	Transceiver
Language	English