FlexRadio Systems Flex-3000 User Manual

U P D A T I N G T H E F L E X - 3 0 0 0 F I R M W A R E A P P E N D I X B
Note: If you do not hear the relays click, switch off the FLEX-3000 and then
switch it on again. Start up PowerSDR and if you do not get a
firmware version error message (see Figure 25 on page 30) all is well.
If you do get the error message, try updating the firmware again
following the procedure described above.
[The rest of this page has been left blank intentionally]
181  2003-2009 FlexRadio Systems
Figure 175: Burn.bat Final Screen

FlexRadio Systems Flex-3000 Specifications

General

Brand	FlexRadio Systems
Model	Flex-3000
Category	Transceiver
Language	English