FlexRadio Systems Flex-3000 User Manual

H A R D W A R E I N S T A L L A T I O N C H A P T E R 1
Verify that the options selected in the previous two steps are correct. If not, click the Back button to
make any changes. Click the Install button to confirm these settings and to copy the necessary files to
the selected install directory. If a Software Installation warning
1
appears, click the Continue Anyway
button to proceed.
Once the files have been copied, you will see the screen shown in Figure 9.
Note: You will not see Figures 9 through 12 in Windows Vista as the drivers
will load “silently”.
[The rest of this page has been left blank intentionally]
1
This warning is displayed because the hardware driver has not passed the formal Windows Logo Testing program. The
FlexRadio driver has, however, been extensively tested and will not destabilize or impair your system
12  2003-2009 FlexRadio Systems
Figure 8: FlexRadio Driver Setup Wizard - Ready to Install

FlexRadio Systems Flex-3000 Specifications

General

Brand	FlexRadio Systems
Model	Flex-3000
Category	Transceiver
Language	English