FLIR E96 User Manual

Camera settings
22
• Delete all saved files...: This displays a dialog box where you can choose to perma-
nently delete all the saved files (images and videos) from the memory card or to can-
cel the delete action.
22.5 Device settings
• Language, time & units: This submenu includes settings for a number of regional
parameters:
◦ Language.
◦ Temperature unit.
◦ Distance unit.
◦ Time zone.
◦ Date & time.
◦ Date & time format.
• Focus
12
: This submenu includes the following settings:
◦ Autofocus: When autofocusing, the infrared camera can use one of the following
focus methods:
– Contrast: The focus is based on maximizing the image contrast.
– Laser: The focus is based on a laser distance measurement. The laser is on
when the camera is autofocusing.
◦ Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
◦ Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
Note You can also enable/disable screen rotation on the swipe-down menu. For
more information, see section 6.4.4 Swipe-down menu.
◦ Image overlay information: This setting specifies what image information the cam-
era will display as an overlay on the image. For more information, see section 6.4.5
Image overlay information. You can select the following information to display:
– Compass.
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: The screen brightness slider is used to control the brightness
of the screen.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 6.4.4 Swipe-down menu.
• Geolocation: This submenu includes the following settings:
◦ GPS: This setting is used to enable/disable the GPS.
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 7.17 Calibrating the compass.
• Lamp & laser: This submenu includes the following settings:
#T810587; r. AA/74078/74713; en-US
94
12.This item is dependent on the camera model.

FLIR E96 Specifications

General

Brand	FLIR
Model	E96
Category	Thermal cameras
Language	English